ThermalGuard CC1.7 is a fast set, hybrid cell, water-blown spray polyurethane foam (SPF) insulation that achieves exceptional yield without off-gassing in the drum. ThermalGuard CC1.7 is applied as a liquid and expands 25x in seconds to fill and seal building cavities of any shape and size. It exhibits superior thermal insulation, air-barrier, and sound attenuation properties compared to conventional insulation materials. Once fully cured ThermalGuard CC1.7 remains rigid maintaining significant structural strength and thermal insulation properties in adverse conditions across a wide variety of applications.

ThermalGuard CC1.7 is designed for use in residential and commercial structures, exterior foundation or perimeter insulation, below grade applications, exterior tank/pipe insulation, etc. ThermalGuard CC1.7 can replace a 2.0 lb density foam in applications where a lower cost, semi-rigid foam with superior sprayability, appearance, compressive strength and smooth skin is desired.

ThermalGuard OC1 is an open cell, 100% water-blown spray polyurethane foam insulation system with a density of 1 lb and an R-value of 4.7 per inch. When applied, ThermalGuard OC1 expands to over 50 times in size in approximately 8 seconds, filling and sealing building cavities of any shape and size. It achieves twice the yield of 2 lb spray foam while reducing waste and cleanup time by up to 50% compared to that of a ½ lb spray foam insulation.

ThermalGuard OC1 satisfies energy code in most climate zones at less than 4 inches and is designed to use in wall, attic and roof-deck applications where cavity depth is limited.

ThermalGuard™ CC2 is a fast set, closed cell, 245fa blown spray polyurethane foam (SPF) insulation designed for use in residential and commercial structures, exterior foundation or perimeter insulation, below grade applications, exterior tank/pipe insulation, etc. ThermalGuard CC2 is applied as a liquid and expands 25x in seconds to fill and seal building cavities of any shape and size. It exhibits superior thermal insulation, air-barrier, and sound attenuation properties compared to conventional insulation materials. Once fully cured ThermalGuard CC2 remains rigid maintaining significant structural strength and thermal insulation properties in adverse conditions across a wide variety of applications. ThermalGuard CC2 achieves aClass I Fire retardant rating, is Appendix X compliant without any additional coatings and meets or exceeds minimum building code requirements for fire safety.

TYPICAL USES:

• Insulation foam for walls, ceilings, roof decks, crawlspaces

• Residential, commercial and industrial building insulation

FEATURES & BENEFITS:

• Class I fire rated

• Appendix X compliant without any additional coatings

• Low odor during application and produces no toxic vapors after application

• Seals, insulates and minimizes uncontrolled air movement into a building envelope

• Reduces energy consumption from heating and cooling

• 245fa-blown, non-ozone depleting agent

‍

‍

ThermalGuard OC1.6 is designed for use in residential and commercial structures, exterior foundation or perimeter insulation, below grade applications, exterior tank/pipe insulation, etc. ThermalGuard OC1.6 can replace a 2.0 lb density foam in applications where a lower cost, semi-rigid foam with superior sprayability, appearance, compressive strength and smooth skin is desired.

• Adheres to virtually any surface
• Adds structural support
• Seals & insulates in one step
• Great for insulating hard-to-reach areas
• Applied using water as the blowing agent
• Saves up to 500% on heating and cooling costs